Hot Selling JGH-508 PCB Separator
* Before using the machine, please read this manual carefully, and it will help you operate it smoothly.
* * The machine is only designed for circuit board with pre-scored V-cut, does not use in other purposes.
* When operate this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.
VII. Daily maintenance of machine:
During the use of the machine, the maintenance work is quite simple. Keep the machine clean, and paint the anti-rust grease on the upper and lower blades on a regular basis. Designate a person responsible for the operation and maintenance, to ensure the machine precision. Do not use or store it under high or low temperature (see section 3).
VIII. Replacement of blades
A. After long-term using , if upper blade damaged, it can be removed and replaced after loosen knob screw (1). if the lower blade damaged, remove the inner tray (2)first, loosen four grain of screw on the lower blade, then the damaged blade can be removed and replaced. Look at picture four.
B. Basic maintenance:
1. After the completion of the work, please turn off the power supply and remove scraps.
2. Pay attention to the protection of upper and lower cutters.
3. When the machine is out of work for a long time, please remove the upper and lower cutters and coat with oil to protect. Please wipe it before use.
4. Pay attention to checking the fastening of all screws
PCB depanelizer LED strip cutte
Pneumatic PCB Separator Guillot
PCB separator/PCB cutting machine/LED trip separator
PCB separator Include: PCB cutting machine, PCB V-cut machine, aluminum plate machine, Air driver PCB depaneler, CAB maestro 4M pcb cutter, LED plate separator, online PCB separator, PCB LED board cutter LED V-cut machine aluminum pcb separator Boresh e V-cut, 1.2M led cutter, V-cut pcb separator, Aluminum plate separator, cutting PCB tool, LED plate separator
Please contact with us for more information
2018-03-01 Nancy Liu