SMT factory JGH-217 Curve Automatic PCB Separator
It is used to separate the stamp hole PCB and the irregular PCB.
Drive System Motor: stepper motor
Spindle speed: 60000r / m
Cutting performance: 500mm / s
Drive system repeatability: ± 0.02mm
Cutting speed: up to 100mm / S depends on the circuit board material and cutting quality
Configuration: X, Y, Z axis, travel: 400X400X100mm, travel can also be customized.
Repeatability: <0.1mm, for contours of straight lines and curves
PCB positioning: special or standard fixture
Loading and unloading methods: manual mode
Thickness of the circuit board: 0.4mm-4mm
Safety settings: Emergency stop switch, spindle motor overheating and stepper motor overload detection
Power: 0.95 kW
Maximum speed: 60000 r / min
Machine size: 594mm * 653mm * 686mm
CCD and display optional
Programming: small keyboard input teaching
Data storage capacity: 1-200 group files
Control: microcomputer control, online teaching programming, CAD file import
Transmission: rail + synchronous wheel + timing belt (can be customized rail + screw)
Vacuum cleaner: 1.5KW, 220V;
Size: 480mm * 405mm * 418mm;
can work 24 hours a day
Vacuum mode: under the vacuum
* Before using the machine, please read this manual carefully, and it will help you operate it smoothly.
* * The machine is only designed for circuit board with pre-scored V-cut, does not use in other purposes.
* When operate this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.
VII. Daily maintenance of machine:
During the use of the machine, the maintenance work is quite simple. Keep the machine clean, and paint the anti-rust grease on the upper and lower blades on a regular basis. Designate a person responsible for the operation and maintenance, to ensure the machine precision. Do not use or store it under high or low temperature (see section 3).
VIII. Replacement of blades
A. After long-term using , if upper blade damaged, it can be removed and replaced after loosen knob screw (1). if the lower blade damaged, remove the inner tray (2)first, loosen four grain of screw on the lower blade, then the damaged blade can be removed and replaced. Look at picture four.
B. Basic maintenance:
1. After the completion of the work, please turn off the power supply and remove scraps.
2. Pay attention to the protection of upper and lower cutters.
3. When the machine is out of work for a long time, please remove the upper and lower cutters and coat with oil to protect. Please wipe it before use.
4. Pay attention to checking the fastening of all screws
Please contact with us for more information